Nat Vent Accessories

A range of accessories for new systems and maintenance of existing window and rooflight automation

Products

A white plastic wall-mounted light switch with a single toggle in the center, seamlessly integrating with advanced door automation systems.

S50 – Rocker Switch

S50 rocker switch for the operation of 230V AC Actuators or 24V DC Actuators (via 24V DC controllers)

A small, gray lockbox with a set of two keys inserted into the keyhole, showing the "Close" and "Open" positions—ideal for controlling door automation systems.

RRTKEY – Key Switch

RRTKEY Key Switch for operation of 230V AC window actuators. 3 positions – OPEN, OFF, CLOSE.

A white remote control with three buttons (up, down, and center) on a white background, ideal for controlling window actuators.

RCU3-RC – Remote Transmitter

RCU3-RC Remote Transmitter for handheld operation of actuators via radio signal when used with the CCU3 controller. Available in 1 channel or 5 channel versions.

WindowMaster WCA 100 handheld remote for operation of electric window actuators.
WindowMaster

WCA 100 – Remote Transmitter

WindowMaster WCA 100 Remote transmitter for operation of windows actuators connected to a MotorController type WCC 103 A or WCC 106 A.

A white Honeywell thermostat with a rotary dial for temperature control and a small switch, designed to seamlessly integrate with natural ventilation systems, all set against a plain white background.

TS2 – Room Thermostat

TS2 room thermostat to automatically operate 24V DC actuators based on room temperature via compatible control units.

TM1 digital timer for natural ventilation systems with 24v window actuators.

TM1 – Digital Timer

TM1 digital timer  for the operation of vents by setting their operation time (open and close). It has a display which makes it even more useful. May be switched off on the switch.

CTS2 CO2 sensor for natural ventilation system with automatic windows.

CTS2 – CO2 Sensor

CTS2 CO2 sensor for use with compatible controllers to automatically operate 24V DC actuators based on internal CO2 levels.

A white plastic electrical device with a long cord and exposed wires at the end, designed for natural ventilation. There is text printed on the surface of the device.

RS1 – Rain Sensor

RS1 rain sensor 12V for use with the CCU3 Controller, upon the detection of rain the sensor will send a close signal to the window or vent.

A small, square, gray electronic device with a flat, ridged surface on top and a connector port on one side, perfect for integrating into window actuators to enhance natural ventilation.
WindowMaster

WLA 331 – Rain Sensor

WindowMaster WLA 331 rain sensor (24v) for automatic operation of 24VDC actuators via compatible control panels.

Rectangular white plastic electrical junction box with four knockouts on top, perfect for integrating window actuators or door automation systems.
K + G Tectronic products available from Teal Products

PSU-2 – 24V Transformer

PSU-2 Transformer (2 Amp / 24VDC) for the operation of 24VDC actuators.

Motor Load

2 Amp

Voltage Input

230V AC

Voltage Output

24V DC

Zones

1
A rectangular, gray plastic electrical junction box with screw-on corners, featuring four circular knockouts on the top edge, suitable for integrating door automation systems.
K + G Tectronic products available from Teal Products

PSU-4 – 24V Transformer

PSU-4 Transformer (4 Amp / 24VDC) for the operation of 24V DC actuators.

Motor Load

4 Amp

Voltage Input

230V AC

Voltage Output

24V DC

Zones

1
A rectangular, gray plastic electrical junction box with screw-on corners, featuring four circular knockouts on the top edge, suitable for integrating door automation systems.
K + G Tectronic products available from Teal Products

PSU-8 – 24V Transformer

PSU-8 Transformer (8 Amp / 24VDC) for the operation of 24VDC actuators.

Motor Load

8 Amp

Voltage Input

230V AC

Voltage Output

24V DC

Zones

1