WCC 103 – Control Unit
WindowMaster WCC 103 Controller (3 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
WindowMaster WLA 331 rain sensor (24v) for automatic operation of 24VDC actuators via compatible control panels.
In stock, next day delivery
WindowMaster WCC 103 Controller (3 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
WindowMaster WCC 103 Controller (3 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
WindowMaster WCC 106 controller (6 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
WindowMaster WCC 310/320 controller (10 or 20Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
WindowMaster WCC 310/320 PLUS controller (10 or 20Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
WindowMaster WSC 104 smoke control AOV panel (4 Amp) for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation.
WindowMaster CompactSmoke WSC 310-PLUS Smoke Control AOV Panel 2 zone, 10 Amp for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation.
WindowMaster WSC 520 Smoke Control AOV Panel for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation. Can be configured to operate up to 13 motorlines, with a 20 Amp max. motor load.
WindowMaster FlexiSmoke WSC 540 Smoke Control AOV Panel for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation. Can be configured to operate up to 26 motorlines, with a 40 Amp max. motor load.
WindowMaster FlexiSmoke WSC 560 Smoke Control AOV Panel for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation. Can be configured to operate up to 39 motorlines, with a 60 Amp max. motor load.
SCP500 AOV Control Panel (5 Amp) for the operation of 24V DC AOV or OV’s. Complete with Fire Alarm interface and 72 hour battery backup system as standard.
SCP800 AOV Control Panel (8 Amp) for the operation of 24V DC AOV or OV’s. Complete with Fire Alarm interface and 72 hour battery backup system as standard.
Thank you so much to those who made to trip to the Fire Safety Event (FSE) this week. It meant a lot to us to finally be able to share and demonstrate some of our newest products. Your feedback on the new HMI-SCP touchscreen and BG3 call point has been fantastic!
There are many types of ventilation, many of which are categorised as a form of smoke ventilation or natural ventilation. Providing buildings with ventilation controls is essential for complying with Approved Document B – Fire Safety, or Approved Document F – Ventilation of the UK Building Regulations.
Generally, electric window openers, also known as electric window actuators, are operated remotely.
WindowMaster CompactSmoke WSC 310-PLUS Smoke Control AOV Panel 2 zone, 10 Amp for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation.
Motor Load
Voltage Input
Voltage Output
Zones
CCU1 Indoor Climate Control Unit for the operation of 230V AC window actuators. Unit can be controlled via manual dimmer switch on front of panel, or via automatic sensors to improve indoor Air Quality.
Motor Load
Voltage Input
Voltage Output
Zones
CCU2 Indoor Climate Control Unit for the operation of 230V AC window actuators. Unit can be controlled via manual switch on front of panel, or via automatic sensors for improved Air Quality.
Motor Load
Voltage Input
Voltage Output
Zones
CCU3 Controller (6.3 Amp / 230V AC) with Radio Receiver for the operation of 230V AC actuators. Unit can be linked to a Rain Sensor, Switch or Remote Transmitter.
Motor Load
Voltage Input
Voltage Output
Zones
RCU1 Controller with Radio Receiver for the operation of 230V AC actuators. Unit can be linked to a Wireless Switch, Timer or Transmitter
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WCC 310/320 controller (10 or 20Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
Motor Load
Voltage Input
Voltage Output
Zones
RCU3-RC Remote Transmitter for handheld operation of actuators via radio signal when used with the CCU3 controller. Available in 1 channel or 5 channel versions.
RCU1-SWITCH Wireless Switch for the operation of 230V AC Actuators (via RCU1 Controller)
RCU1-TIMER Wireless Timer for the automatic operation of 230V AC Actuators (via RCU1 Controller)
RCU1-RC Remote Transmitter for the operation of 230V AC Actuators (via RCU1 Controller).
RS1 rain sensor 12V for use with the CCU3 Controller, upon the detection of rain the sensor will send a close signal to the window or vent.
RRTKEY Key Switch for operation of 230V AC window actuators. 3 positions – OPEN, OFF, CLOSE.
S50 rocker switch for the operation of 230V AC Actuators or 24V DC Actuators (via 24V DC controllers)
TS2 room thermostat to automatically operate 24V DC actuators based on room temperature via compatible control units.
WindowMaster WLA 330 wind & rain sensor for automatic operation of 24VDC actuators via compatible control panels.
WindowMaster WLA 331 rain sensor (24v) for automatic operation of 24VDC actuators via compatible control panels.
VCS-S2 Smoke Control AOV Panel (5.0 Amp) for the operation of 24VDC AOV or OV’s. Complete with Fire Alarm interface and 72 hour battery backup system as standard.
Motor Load
Voltage Input
Voltage Output
Zones
Windowmaster WSC 204 Smoke Control AOV Panel (4.8 Amp) for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation.
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WSK 501 manual call point (Breakglass) for use with compatible Smoke Control Panels. Upon a signal from the Manual Call Point (MCP) the AOV or OV Smoke Vent will open releasing the smoke detected in that area.
BG1/S Manual Call Point (Breakglass) for use with our range of Smoke Vent Panels. Upon a signal from the BG1/S Call Point the Smoke Vent Control Panel will send an open signal to the Automatic Smoke Vent.
BG1/FOS Manual Call Point (Switch) for use with our range of Smoke Ventilation Control Panels. Smoke Call Point will allow for an open or close signal to be sent to AOV Smoke Vent upon the detection of Smoke.
SSR optical Smoke Sensor for use with our range of smoke control AOV panels. Upon a signal from the SSR-D smoke sensor the AOV Control Panel will send an open signal to the AOV Actuator.
Windowmaster WSK 320 Manual Call Point (Breakglass) for use with WSC204/KP Smoke Control Panels. Upon a signal from the Manual Call Point (MCP) the AOV or OV Smoke Vent will open releasing the smoke detected in that area.
EVC Climate Control Unit for the operation of 230V AC window actuators. Supplied complete with digital control unit and weather station (rain, temperature and wind sensor).
Motor Load
Voltage Input
Voltage Output
Zones
EVC-RC8 Remote Transmitter for the operation of 230V AC Actuators (via EVC Controller).
PSU-2 Transformer (2 Amp / 24VDC) for the operation of 24VDC actuators.
Motor Load
Voltage Input
Voltage Output
Zones
PSU-4 Transformer (4 Amp / 24VDC) for the operation of 24V DC actuators.
Motor Load
Voltage Input
Voltage Output
Zones
PSU-8 Transformer (8 Amp / 24VDC) for the operation of 24VDC actuators.
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WSC 520 Smoke Control AOV Panel for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation. Can be configured to operate up to 13 motorlines, with a 20 Amp max. motor load.
Motor Load
Voltage Input
Voltage Output
Zones
CTS2 CO2 sensor for use with compatible controllers to automatically operate 24V DC actuators based on internal CO2 levels.
WindowMaster WCC 310/320 PLUS controller (10 or 20Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WSC 104 smoke control AOV panel (4 Amp) for control of ±24V DC Actuators for the function of smoke extraction combined with daily comfort ventilation.
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WCC 103 Controller (3 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WCC 103 Controller (3 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
Motor Load
Voltage Input
Voltage Output
Zones
WindowMaster WCC 106 controller (6 Amp / 24VDC) for the operation of 24V DC actuators. Unit can be linked to a variety of manual or automatic inputs.
Motor Load
Voltage Input
Voltage Output
Zones
SCP500 AOV Control Panel (5 Amp) for the operation of 24V DC AOV or OV’s. Complete with Fire Alarm interface and 72 hour battery backup system as standard.
Motor Load
Voltage Input
Voltage Output
Zones
SCP800 AOV Control Panel (8 Amp) for the operation of 24V DC AOV or OV’s. Complete with Fire Alarm interface and 72 hour battery backup system as standard.
Motor Load
Voltage Input
Voltage Output
Zones
BG3/FOS Manual Call Point (Switch) for use with our range of Smoke Ventilation Control Panels. Smoke Call Point will allow for an open or close signal to be sent to AOV Smoke Vent upon the detection of Smoke.
BG4/FOS Firemans Key Switch for use with our range of Smoke Ventilation Control Panels. Smoke Call Point will allow for an open or close signal (via Control Panel) to be sent to AOV Smoke Vent upon the detection of Smoke.
BG6/FOS Firemans Key Switch for use with our range of Smoke Ventilation Control Panels. Smoke Call Point will allow for an open or close signal (via Control Panel) to be sent to AOV Smoke Vent upon the detection of Smoke.